Pages

Friday, 10 February 2012

Week 9 Studentship Task



Tuning

The key components of a tuning circuit are the inductor (L) and the capacitor
(C).

The coil aerial picks up the transmission via the generator and sends it to
the headphone socket.

Resonance. The tuner is the part of the radio receiver that converts
audio-frequency signals. Resonance is the way that the tuner selects the
particular signal transmitting through the aerial to convert.

The tuning circuit allows for the value of the capacitor (C) to change -
which in turn tunes the radio to different frequencies.

Demodulation
The central component in the demodulation section of the circuit is the diode
that is configured to behave as an envelope detector. An envelope detector is a
seperate circuit that takes in the signal and gives out a compacted version of
the first signal.

The diode demodulates the carrier wave by using a full or half wave rectifier
(a rectifier changes alternating current to direct current - so it can only flow
in a singular direction) and removing all of the high frequency waves. This is
then filtered to create a clearer sound that flows well.

Amplification

The key component of the amplification section of the circuit is the
earphones. Without earphones, or a speaker the radio waves wouldn't be
amplified.

The headphones amplify the audio signal after the radio waves are demodulated
and made into legible sound. The reciever and the aerial originally pick up the
wave. The reason the headphones need electrical current is because the
amplification part of the circuit needs energy to give out a strong signal.
Otherwise even with an amplification section to the circuit the signal would not
be enough.

References:
http://sites.google.com/site/radio2radioproject/how-the-radio-receiver-works
http://www.howstuffworks.com/radio.htm
http://en.wikipedia.org/wiki/Tuner_%28radio%29
http://en.wikipedia.org/wiki/demodulation

No comments:

Post a Comment